Measure the right quantity
Measure the runs being replaced, count downspouts, and note building height and visible fascia concerns. Do not use the total roof area as the gutter quantity.
Gutter Replacement Cost Calculator
Estimate a full gutter replacement budget from measured gutter runs, downspouts, material, roof-edge condition, access, and region.
Your inputs are used only in this browser session to calculate the estimate. They are not saved.
Estimated Project Cost Range
Low$2,500$11.00 / linear foot
Typical$4,700$21.00 / linear foot
High$9,250$42.00 / linear foot
Primary quantity180 linear ft of replacement gutter
Project typeGutter replacement
Region factorUS national baseline x1
This breakdown allocates the modeled total using preset percentage shares. It does not separately price each material, trade, or local permit fee. Check the selected scope and exclusions before comparing an installed quote.
Illustrative Budget Allocation% of totalAmount
Materials47%$2,200
Labor33%$1,550
Removal & disposal8%$376
Trim / permit / other5%$235
Waste & contingency7%$329
How this estimate is calculated
Total range = replacement gutter linear feet x adjusted replacement cost per foot + replacement downspout allowance, with material, replacement scope, roof-edge condition, access, and region included.
The model treats full removal and replacement of old gutter runs as the primary quantity. It adds downspouts separately because outlets, elbows, straps, splash blocks, extensions, and discharge location can change independently from the straight gutter run.
Cost basis: US national gutter replacement baseline adjusted by material/profile, removal scope, roof-edge condition, access, downspout count, and broad region factor. It is not a gutter guard add-on quote, spot repair estimate, roof repair bid, drainage engineering report, or ZIP-level contractor price.
Disclaimer: This is a budgeting estimate only, not a contractor quote, inspection, engineering opinion, code review, legal advice, insurance advice, tax advice, or safety recommendation. Actual costs vary by local labor rates, material availability, contractor schedule, permit requirements, site conditions, and scope changes.
What should I include when budgeting replacement gutters?
Budget the replacement runs alongside old-gutter removal, downspouts, access, and roof-edge condition. A new-run installation price may exclude the work needed to remove and replace an existing system. Fascia damage still needs inspection and a written repair scope.
Compare the same written scope
Check material and profile, removal and haul-off, outlets, downspouts, guards, fascia repairs, and warranty. Keep gutter and roof-replacement scopes separate where their allowances overlap.
Need a related estimate?
Use the general gutter tool for installation-focused material and downspout planning.
Gutter Cost CalculatorHow to use this gutter replacement calculator
Use it for a planning range
- Measure the old gutter runs that will be removed and replaced, then count the full downspout runs.
- Choose material/profile, replacement scope, roof-edge or fascia condition, access level, and broad US region.
- Use the range to compare written quotes by removal, disposal, hangers, outlets, downspouts, fascia allowance, discharge details, warranty, and what remains excluded.
Example gutter replacement estimate
- 180 linear ft of replacement gutter
- 6 replacement downspouts
- 5 in aluminum K-style, full system replacement, sound fascia, standard two-story access, and US national baseline
The calculator multiplies the replacement gutter length by an adjusted replacement cost per foot, adds the downspout allowance, and shows a low, typical, and high planning range.
A local quote above the range may include fascia repair, roof-edge repair, oversized downspouts, difficult access, old guard removal, or drainage work outside the replacement gutter run.
Simple one-story replacement example
- 120 linear ft of same-layout gutter replacement
- 4 downspouts
- Vinyl or budget sectional system, easy one-story access, and South / lower-cost regional factor
The estimate stays in a lower band because the same-layout swap, easy access, and lower-cost region reduce the installed replacement assumptions.
Use this as a planning range only; even small jobs can have local minimums, hidden fascia damage, or extra discharge work.
Premium roof-edge risk example
- 260 linear ft of replacement gutter
- 8 downspouts
- 6 in heavy-gauge aluminum, rerouted runs, minor fascia allowance, difficult access, and West regional factor
The estimate moves higher because length, material/profile, rerouting, fascia risk, access, downspout count, and region compound.
Ask contractors to separate full gutter replacement from fascia repair, drainage extensions, gutter guards, and roof-edge repairs so quotes can be compared fairly.
Common cost drivers
- Replacement length and downspout count set the base quantity, but corners, returns, miters, garage runs, and roofline complexity change labor.
- Vinyl sectional, 5 inch aluminum K-style, 6 inch heavy-gauge aluminum, steel, half-round, and copper systems have different material and fabrication costs.
- Full removal, old guard removal, disposal, hanger replacement, rerouted outlets, and extra downspouts can make replacement more expensive than first-time installation.
- Fascia rot, drip-edge conflicts, roof-edge damage, valley drainage, steep ground, decks, landscaping, and multi-story access can push the job into repair or specialty scope.
- Gutter guards, underground drains, grading, rain barrels, roof repair, and foundation drainage should be priced separately from full gutter replacement.
Planning tables for this estimate
Replacement scope guide
Use this table to keep full replacement separate from guard-only add-ons or spot repairs.
| Scope | Use this page when | Keep separate |
|---|---|---|
| Same-layout replacement | Old gutters come down and new gutters go back on the same roof edges | Fascia repair, underground drainage, and gutter guards |
| Full system replacement | Gutters, hangers, outlets, downspouts, elbows, straps, and disposal are included | Roof repair, soffit repair, foundation drainage, and landscaping repair |
| Rerouted or upgraded drainage | Extra outlets, larger downspouts, or corrected discharge paths are being added | Drainage engineering, grading, dry wells, and buried drain lines |
| Guard-only add-on | Existing gutters stay in place and only guards are added | Use a future gutter guard calculator or contractor add-on quote instead |
This page estimates replacement of gutter runs. It does not decide drainage design, roof repair, or guard-only upgrade scope.
Downspout replacement check
Full replacement quotes should spell out more than straight gutter footage.
| Planning item | Rule of thumb | Quote check |
|---|---|---|
| Spacing | Often one downspout every 30 to 40 linear ft | Ask whether valleys or long runs need more outlets. |
| Replacement count | 180 linear ft often has about 5 to 7 downspouts | Compare the bid count with your calculator input. |
| Outlet size | 2x3 in is common; 3x4 in moves more water | Ask when oversized outlets or 6 in gutters are needed. |
| Discharge | Extensions should move water away from the foundation | Confirm splash blocks, extensions, or drain tie-ins are included or excluded. |
| Removal | Old gutters, hangers, guards, and fasteners take labor to remove | Ask whether haul-away and cleanup are included. |
Downspout layout still depends on roof area, rainfall, valleys, grade, and foundation discharge. Use a pro for drainage-sensitive homes.
Quote line items to compare
Ask each gutter contractor to break out these line items before comparing totals.
| Line item | Why it changes price | Ask the contractor |
|---|---|---|
| Measured replacement length | Corners, returns, garage runs, and excluded runs change footage. | What old runs are removed and replaced? |
| Material / profile / size | Vinyl, aluminum, steel, copper, K-style, half-round, 5 in, 6 in, and gauge affect cost. | What exact material, profile, size, color, and gauge are included? |
| Removal and disposal | Old gutters, guards, hangers, fasteners, and cleanup add labor. | Is removal, haul-away, and site protection included? |
| Downspouts | Count, size, elbows, straps, offsets, extensions, and splash blocks change parts. | Where does each downspout discharge water? |
| Fascia and roof edge | Rot, drip edge conflicts, and damaged boards can become repair scope. | Is fascia repair included, excluded, or priced as an allowance? |
| Warranty and service | Material warranty, workmanship warranty, leak callbacks, and payment schedule differ. | What warranty and change-order rules apply? |
Use this range to compare local quotes
Before comparing gutter replacement quotes, make sure each written bid uses the same replacement length, material, profile, downspout count, removal, fascia, access, discharge, warranty, and exclusion assumptions.
Simple same-layout swap
One-story access, sound fascia, shorter runs, budget material, and no layout redesign.
Standard full replacement
Aluminum seamless gutters, measured replacement length, downspouts, removal, disposal, and normal two-story access.
Premium or repair-risk replacement
Copper or heavy-gauge material, difficult access, old guard removal, rerouted outlets, fascia risk, oversized downspouts, or complex rooflines.
Quote checklist
- Replacement footageOld runs removed, new runs installed, corners, returns, garage lines, and excluded spans.
- Material and profileVinyl, aluminum, steel, copper, K-style, half-round, 5 in or 6 in size, gauge, color, and seams.
- Removal and disposalOld gutters, hangers, guards, fasteners, haul-away, cleanup, and property protection.
- Downspouts and dischargeCount, size, outlet locations, elbows, straps, extensions, splash blocks, and foundation distance.
- Fascia and roof edgeRot repair, fascia board replacement, drip edge conflicts, roof-edge damage, and wood allowance.
- Access and stagingStories, steep ground, decks, shrubs, tight side yards, lift needs, and ladder safety setup.
- Gutter guards boundaryWhether guards are excluded, removed, reused, or priced as a separate accessory quote.
- Warranty and exclusionsMaterial warranty, workmanship warranty, leak callbacks, drainage exclusions, payment terms, and change orders.
What is not included
- Guard-only add-ons, gutter cleaning, spot leak repair, sealing existing joints, and minor hanger repair when the gutter run is not being replaced.
- Major fascia replacement, rafter-tail repair, soffit repair, roof replacement, ice-dam repair, foundation waterproofing, grading, underground drains, and landscape restoration.
- Drainage engineering, rain barrels, dry wells, commercial gutter systems, exact code decisions, ZIP-level local pricing, financing, rebates, and contractor referral promises.
When to call a licensed pro
- Call a qualified gutter or exterior contractor when fascia is soft, roof edges are damaged, water is pooling near the foundation, or downspout layout may affect drainage.
- Compare quotes by replacement length, material, profile, size, downspouts, removal, fascia allowance, discharge details, access, warranty, and what is excluded.
- Use the broader gutter cost calculator for general installation planning, and keep guard-only accessory work separate from this full replacement estimate.
Cost data note
Manually curated US gutter replacement baseline ranges informed by public exterior cost references, gutter material context, downspout planning rules of thumb, and contractor scope patterns. This is a planning estimate, not a paid cost database extract, drainage design, ZIP-level local price, or contractor bid.
This calculator uses a US national baseline plus broad state/region adjustment. It does not provide ZIP-level pricing.
Sources, assumptions, and review dates
Gutter Replacement Cost Calculator uses independent US planning allowances and broad state or regional adjustments.The example amounts illustrate the stated inputs; they are not a survey of completed projects, live local prices, or offers from an installer. A regional selection does not check local availability.
Price and quantity cross-checks
Sources checked October 21, 2026. These are partial comparisons, not verification of every rate.Regional multipliers and unlisted component allowances remain planning assumptions.
- Angi: gutter installation project and linear-foot guide
Broad installed gutter comparisons across materials. Match downspout footage, removal, guards, and roof access before comparing our total.
Planning and scope guidance
- FTC: choosing a contractor and comparing written estimates
Contractor checks and written estimate scope; this guidance does not supply our cost rates.
These references explain planning and scope checks. They do not validate every dollar amount in the model. See our estimation methodology for quantity calculations, regional factors, and cost allocation limits.
Content updated: . Cost assumptions last reviewed: . A wording update does not mean material or labor rates were resurveyed.
Published by Home Cost Calculator Hub. Report a calculation or source concern with the page and assumptions you used.
Gutter replacement cost calculator FAQ
Is this gutter replacement calculator a contractor quote?
No. It is a range-only budgeting calculator. A contractor still needs to inspect fascia, roof edges, access, drainage, existing gutters, and local scope before quoting.
How is gutter replacement different from the gutter cost calculator?
This page focuses on removing and replacing existing gutter runs, including disposal, downspout replacement, roof-edge condition, and replacement-scope risk. The broader gutter cost calculator is better for general new installation or early gutter planning.
Does this calculator include gutter guards?
No. Gutter guards are treated as an accessory or separate add-on. This page can account for removing old guards during replacement, but it does not price a guard-only project.
Does the estimate include fascia repair?
It includes a roof-edge condition factor for planning, but major fascia replacement, soffit repair, rafter-tail repair, and roof-edge reconstruction need separate inspection and pricing.
How do I measure gutter replacement length?
Measure the roof edges where old gutters will come down and new gutters will be installed. Include returns, garage runs, porches, and disconnected roof sections if they are part of the replacement quote.
Does gutter replacement include downspouts?
Yes. Enter the number of full replacement downspout runs so the calculator can add an allowance for outlets, elbows, straps, extensions, and install labor.
When should I call a gutter professional?
Call a pro when water drains toward the foundation, fascia is rotten, the roofline is complex, downspouts need rerouting, access is high, or old guards and debris make removal uncertain.